General Safety Recommendations - Renishaw SP25-1 Bedienungsanleitung

SP25M user's guide
www.renishaw.com

General safety recommendations

CAUTION: Before unpacking and installing the SP25M probe system, the user should carefully read the safety instructions below
and ensure that they are followed at all times by all operators using the probe system. Use of controls or adjustments, or
performance of procedures other than those specified herein may result in hazardous infra red radiation exposure.
Operators must be trained in the use and application of the SP25M probe system and accompanying products, in the context of the
machine it is fitted to, before being allowed to operate that machine.
NOTE: References are made below to features indicated [†] [‡] [♦] on the illustrations shown below. Please ensure that you clearly
understand all safety instructions. Familiarisation with the SP25M system components, as shown in the following sections is
recommended:
System components overview
Schematic diagram of probe system components
Schematic diagram of FCR25 flexible change rack
Schematic diagram of FCR25 TC flexible change rack
The SP25M probe system has mechanical overtravel protection provided in the probe +Z axis, by a fixed bumpstop. The machine
control system must therefore be able to stop the motion of the machine, in this axis of the probe, before the bumpstop is reached.
If this is not the case, the user must wear eye protection during operation in case of stylus breakage.
Care should be taken to ensure that the optical windows ﴾indicated [♦]﴿, located on both body and module, do not become damaged as they
are made of glass and could cause injury.
CAUTION: Permanent magnets are used in some components of the SP25M system and associated products. It is important to
keep them away from items which may be affected by magnetic fields, e.g. data storage systems, pacemakers and watches etc.
Issued 06 2022
9