Renishaw SP25-1 Bedienungsanleitung Seite 52

SP25M user's guide
www.renishaw.com
Module / stylus 'Crank down'
holder distance using
an extension*
between the
stylus holder
and the crank
centre
SM25-4 / 255 mm
SH25-4
SM25-4A / 205 mm
SH25-4A
SM25-4A / 225 mm**
SH25-4A
SM25-4A / 255 mm
SH25-4A
SM25-5 / 35 mm
SH25-5
SM25-5 / 55 mm
SH25-5
SM25-5 / 80 mm
SH25-5
SM25-5 / 100 mm
SH25-5
* For example, use part number M‐5000‐3592 ﴾20 mm long × M3 stainless steel extension﴿
** Representative test results for these configurations is shown in
*** This excludes the mass of the 20 mm extension
**** This excludes the mass of the 50 mm extension
***** This includes the crank down extension mass
Issued 06 2022
3D scanning 2D scanning and
Maximum point taking
'crank out' Maximum
distance when 'crank out'
measured to tip distance when
of crank (star) measured to tip
stylus of crank (star)
stylus
58 mm 83 mm
58 mm 83 mm
58 mm 83 mm**
58 mm 83 mm
108 mm 158 mm
108 mm 108 mm
108 mm 108 mm
83 mm 108 mm
SH25 stylus holder range metrology performance
Maximum Maximum
'down' stylus permissible
(same as mass of crank
'effective stylus (star) centre
reach' - see plus all styli
straight styli)
400 mm 8 g****
400 mm 11 g
400 mm 10 g***
400 mm 8 g****
100 mm 11 g*****
100 mm 10 g*****
100 mm 11 g*****
100 mm 12 g*****
Maximum
operating stylus
tip deflection
for above in any
orientation
0.4 mm
0.4 mm
0.4 mm
0.4 mm
0.3 mm
0.3 mm
0.3 mm
0.3 mm
52