Setup Menu - OHAUS Scout SJX Serie Bedienungsanleitung

TM
SCOUT SJX SERIES BALANCES

4.3 Setup Menu

Enter this menu to set balance parameters.
Reset:
Auxiliary Graduation:
Filter:
Auto Zero Tracking:
Stable:
Backlight:
Auto Tare:
Auto Off:
End Setup:
Note: Bold always represents factory default value.
Reset [r r eset]
Reset the Setup menu to factory defaults.
NO
YES
Auxiliary Graduation [Au.Grad]
Set whether the weight is displayed with the auxiliary graduation when the Security Switch is in
the locked position.
ON
OFF
Note:
This menu item is only included in models SJX323N/E and SJX1502N/E.
The setting affects kilograms, grams, carats and pennyweights in model SJX323N/E and
kilograms, grams and pennyweights in model SJX1502N/E.
If the scale will be used in direct sales to the public, the OFF setting must be selected.
Filter [FiltEr]
Set the amount of signal filtering.
LOW
MED
HI
Auto Zero Tracking [AZt]
Set the automatic zero tracking functionality.
OFF
0.5d
1d
3d
Stable Range [Stable]
Set the amount the reading can vary while the stability symbol remains on.
0.5d
1d
2d
5d
1.800.561.8187
no, yes
On, Off
Low, Med, High
off, 0.5d, 1d, 3d
0.5d, 1d, 2d, 5d
off, on, auto
off, on, on-acc
off, 1, 5, 10
Exit menu
= not reset
= reset
= the auxiliary graduation is displayed within brackets.
= the auxiliary graduation is not displayed.
= less stability, faster stabilization time
= normal stability, stabilization time
= greater stability, slower stabilization time
= disabled
= the display will maintain zero until a change of 0.5 divisions per second has
been exceeded.
= the display will maintain zero until a change of 1 divisions per second has been
exceeded.
= the display will maintain zero until a change of 3 divisions per second has been
exceeded.
= 0.5 balance division
= 1 balance division
= 2 balance division
= 5 balance division
www.
information@itm.com
.com
EN-11