Setup Menu - OHAUS Valor 4000XW Bedienungsanleitung

EN-10

4.3 Setup Menu

Enter this menu to set scale parameters.
Reset [reset]

Reset the Setup menu to factory defaults.
Power on unit [pwWr.UN]

Set the unit of measure displayed at startup
Auto Tare [A.tArE]

Set the automatic tare functionality. If "on" is selected the first stable gross
weight is tared. If "on-acc" is selected, stable gross loads within the accept
limits are tared (in Checkweigh mode)
 IR Function [Ir.FUNC]
Set the IR sensor functionality.
 IR Adj [Ir.adj]
Set the detecting level for the IR sensor.
(For reference: Hi: ~ 100 mm / 4 inches; Low: ~ 50mm / 2 inches)
Accumulation [aCCUmM]

Set the accumulation functionality.
End Setup [End]

Advance to the next menu or return to the top of the current menu.
4.4 Read Menu
Enter this menu to set user preferences.
Reset [reset]

Reset the Read menu to factory defaults.
Stable Range [Stable]

Set the amount the reading can vary while the stability symbol remains on.
Filter [FILtEr]

Set the amount of signal filtering.
Auto-Zero Tracking [AZt]

Set the automatic zero tracking functionality.
Light [LIGHt]

Sets backlight functionality.
Sleep [SLEEP] (

Set the display shut off time.
Auto off [A.OFF]

Set the automatic shut off functionality.
End Readout [End]

Advance to the next menu or return to the top of the current menu.
(no, yes)
(auto, kg, g, lb, oz, lb:oz)
(off, on, on-acc)
(off, tare)
(hi, low)
(off, auto, manu)
(no, yes)
(0.5, 1, 2, 5)
(low, medium, high)
(off, 0.5, 1, 3)
(hi, med, low)
, on)
off
(off, 1, 5, 10)
Valor™ 4000W Series