Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Place the grease filter (17) with the pins in
the openings.
6. Slide the lock (16) to the left; snap the
grease filter (17) in and release the lock.
7. Close the cover (15) again and allow it to
click into place.
8. Switch the power back on.
Inserting/replacing activated
charcoal filters
The activated coal filters remove odours.
They have to be replaced as soon as the
cooking odours can no longer be adequately
filtered. If used frequently, the filters should be
renewed regularly or at least checked every
6 months. For the source of supply, please
see chapter "Service" on page EN-22.
1. Unplug the mains plug or switch off the
corresponding circuit.
Care and maintenance
(15)
(16)
(17)
2. Flip the cover (15) up.
3. Open the lock (16) on the grease fil-
ter (17) and carefully pull the grease fil-
ter (17) downwards to remove it.
4. Only when replacing the charcoal filters:
The two activated charcoal filters (19)
are located to the right and left of the mo-
tor (18).
Push on the filters and turn them anti-
clockwise.
(19)
(19)
Page EN-19
(15)
(16)
(17)
(18)
(19)
(18)
Werbung
Inhaltsverzeichnis
