Operation
Requirements for safe
operation
• Read chapter "Safety" from page EN-4
and all the safety notices.
• Install the exhaust hood as described in
chapter "Assembly" on page EN-12.
Use elements
(13)
(13)
(13)
(13)
Fan
The fan (13) has three settings:
The fan (13) has three settings:
The fan (13) has three settings:
slow,
medium and
• To set the desired fan level, press the ap-
propriate button.
It will light up.
• To switch off the fan, press the same but-
ton again.
The light will go out.
Lighting
Your exhaust hood is equipped with LED
lighting. The lighting can be switched on or
off independently of the fans.
• To switch the lighting on or off, press
the button (14)
.
Activated charcoal filter
• When using the appliance for air circula-
• If neighbours complain about odours, it
• For the source of supply, please see
• To insert see "Inserting/replacing activat-
(14)
Energy-saving tips
– Only switch on the fan when needed; oth-
– Ensure that there is enough supply air; oth-
fast.
– Clean the grease filter (17) regularly.
Operation
tion, only do so with activated charcoal
filters (19) inserted.
may be a good idea to insert activated
charcoal filters for exhaust air operation,
too.
chapter "Service" on page EN-22.
ed charcoal filters" on page EN-19.
erwise, energy will be wasted.
– Let the fan run as long as cooking fumes
or steam is present.
– The fan is not needed when cooking for
a short time or warming up foods that
have little or no odour.
erwise, the exhaust hood may not function
optimally. If necessary, open the window or
kitchen door.
Page EN-17