Inserting/Replacing Activated Charcoal Filters - hanseatic SY-103D1-E3-C25-900 Gebrauchsanleitung

3. Slide the grease filter lock (8)sideways
and carefully remove the grease filter.
4. Wash the grease filter in a dishwasher or
in the sink like ordinary crockery.
5. Once the grease filters have completely
dried, insert the grease filters in the top of
the recess.
6. Slide the lock upwards, press down on
the grease filter (8) and release the lock.
The grease filter will click into place.
7. Reconnect the power supply.
8. Close the exhaust hood's cover (14) by
pressing the button (13)
onds).
Inserting/replacing activated
charcoal filters
Activated charcoal filters are required for
circulation air operation. They help combat
odours. They have to be replaced as soon
as the cooking odours can no longer be ade-
quately filtered.
(8)
If used frequently, you should change the fil-
ters regularly. Check them at least every 6
months.
For the source of supply, please see chapter
„Our Service Centre" on page 22.
1. Open the exhaust hood's (14)cover by
(14)
pressing the button (13)
onds).
2. Unplug the mains plug or switch off the
power to the corresponding main fuse.
3. Slide the grease filter lock (8) sideways
and carefully remove the grease filter up-
wards.
(13)
(for 3 sec-
4. Turning them clockwise, unscrew both ac-
tivated charcoal filters (5) to the right and
Care and maintenance
(5)
Page 19
(8)
(for 3 sec-