Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-10
Care and maintenance
5. Place the grease filter (15) with the pins
into the openings.
6. Push the lock (14) to the side; snap the
grease filter (15) shut and release the lock
again.
7. Close the cover (13) again and allow it to
click into place.
The exhaust hood is now mounted to the
wall.
8. Switch the power back on.
Inserting/replacing activated
charcoal filters
(13)
Activated charcoal filters are required for
circulation air operation. They help combat
odours. They have to be replaced as soon as
the cooking odours can no longer be adequa-
tely filtered.
If used frequently, you should change the fil-
ters regularly. Check at least every 6 months
For the source of supply, please see chapter
(14)
„Service" on page EN-23.
(15)
1. Unplug the mains plug or switch off the
corresponding circuit.
(15)
2. Flip the cover (13) up.
3. Open the locks (14) on the grease fil-
ter (15) and carefully remove the grease
filter.
(13)
(14)
Werbung
Inhaltsverzeichnis
