Inserting/Replacing Activated Charcoal Filters - hanseatic SY-3503C5-E12-C29-L191-600 Gebrauchsanleitung

(19)
(20)
3. Push the lock (19) of the grease filter (20)
down; release the lock (19) again and re-
move the grease filter (20) carefully.
4. Wash the grease filters (20) in a dishwas-
her or in the sink like ordinary dishware.
(21)
(22) (22)
5. Place a grease filter (20) with the pins (21)
into the openings (22).
6. Push the lock (19) down; snap the grease
filter (20) shut and release the lock again.
7. Close the cover (18).
8. Switch the power back on.
Care and maintenance
Inserting/replacing activated
charcoal filters
The activated coal filters remove odours. They
have to be replaced as soon as the cooking
odours can no longer be adequately filtered.
If used frequently, the filters should be re-
newed regularly or at least checked every 6
months.
For the source of supply, please see chapter
„Service Centre" on page EN-22.
1. Unplug the mains plug or switch off the
corresponding circuit.
(19)
(20)
2. Push the lock (19) of the grease filter (20)
down; release the lock (19) again and re-
move the grease filter (20) carefully.
(20)
Page EN-19
(24)
(23)