Attaching The Exhaust Air Hose - hanseatic SY-103E9A-P1-C84-L121-600 Gebrauchsanleitung

Page EN-14 Assembly
(11)
5. Carefully mount the exhaust hood on the
2 round-head screws (11) on the keyhole
openings.
6. If necessary, remove the exhaust hood
again to loosen or tighten the screws
in order to ensure that the hood is flush
with the wall.
2x
7. Turn 2 round-head screws (12) into the
prepared wall plugs to secure the ex-
haust hood and screw the exhaust hood
tightly to the wall.
(11)
8. Place the grease filter (17) with the pins
in the openings.
9. Slide the lock (16) to the left; snap the
grease filter (17) in and release the lock.
10. Close the cover (15) again and allow it to
click into place.
The exhaust hood is now mounted to the
wall.

Attaching the exhaust air hose

(12)
The exhaust air hose (4) must be installed
if you intend to use the exhaust hood with
exhaust air operation.
(4)
1. Insert the end of the exhaust air hose (4)
with the larger diameter (153 mm) into the
connection with the check valve.
2. Secure the lower end of the exhaust hose
with the cable tie (9).
(15)
(16)
(17)
(9)