Special Functions; Programming Functions; Setting The Ring Tone; Setting The Flash Time - AUDIOLINE Confi DECT 1 Bedienungsanleitung

7

Programming functions

For better clarity, some buttons on the number pad are inscribed with the programming
functions that are available. Programming functions are selected using the menu button
and the appropriate numbers.
7.1

Setting the ring tone

The mobile unit can respond with five different ring tones when a call comes through.
1. Press the menu button
2. Press the number 1
ring tone will appear in the display.
3. Press the menu button
4. Now select the required ring tone with the numbers 1 to 5. You will hear the
corresponding tone with each selection.
5. After you have found the right ring tone, confirm your selection with the menu
button MENÜ . You can exit programming without saving by holding the
pressed.
6. To exit programming, briefly press the
7.2

Setting the flash time

The telephone has flash times of 100ms, 300ms, 800ms and 1000ms (factory setting
100ms).
1. Press the menu button
2. Press the number 3 on the number pad. The currently assigned flash time will
appear in the display.
3. Press the menu button
flash.
4. Now select the required flash time with the numbers 1 to 4.
1 = 100; 2 = 300ms, 3 = 800ms; 4 = 1000ms
5. After you have entered the required flash time, confirm your selection with the
menu button
button pressed.
6. To exit programming, briefly press the
36

- Special functions -

MENÜ until the
on the number pad. The number of the currently selected
MENÜ again briefly and the number in the display will flash.
MENÜ until the
MENÜ again briefly and the flash time in the display will
MENÜ . You can exit programming without saving by holding the
symbol appears in the display.
button.
symbol appears in the display.
button.
button