Operation; Making A Call Using The Receiver Or Handsfree Feature - AUDIOLINE TEL38 Bedienungsanleitung

4

Operation

4.1

Making a call using the receiver or handsfree feature

The AUDIOLINE 38 telephone can be used like any conventional telephone and, in
addition, has some useful special features, which make phoning considerably
easier for you. You have two ways of making a call:
A: Making a call using the receiver
1. Lift the receiver and wait until you hear a dialling tone.
2. Now dial the required telephone number. The display shows the number
dialled. The display can show a telephone number with a maximum of 16
digits. If the number dialled is longer than this, only the last 16 digits will
be displayed.
3. To end the call, replace the receiver.
If you want to change during a call from the receiver to the handsfree facility,
press the
B: Making a call using the handsfree facility
1. Press the handsfree button
on and the display will show the
from the in-built loudspeaker.
2. Now dial the required telephone number. The display shows the number
dialled. The display can show a telephone number with a maximum of 16
digits. If the number dialled is longer than this, only the last 16 digits will
be displayed.
If the other party accepts the call, his voice will be heard over the in-built
loudspeaker. When using the handsfree facility always speak loudly and clearly
towards the telephone.
The volume can be adjusted using the
handsfree button.
If you want to change from the handsfree facility to the receiver, simply lift the
receiver.
3. To end the call, press the handsfree button
- Operation -
button and replace the receiver on the rest.
. The LED above the button will come
symbol. You will hear the dialling tone
buttons next to the
or replace the receiver.