Operation; Making A Call Using The Receiver Or Handsfree Feature - AUDIOLINE TEL28 Bedienungsanleitung

4

Operation

4.1

Making a call using the receiver or handsfree feature

The AUDIOLINE TEL28 telephone can be used like any conventional telephone
and, in addition, has some useful special features, which make phoning
considerably easier for you. You have two ways of making a call:
A: Making a call using the receiver
1. Lift the receiver and wait until you hear a dialling tone.
2. Now dial the required telephone number. The display shows the number
dialled. The display can show a telephone number with a maximum of 12
digits. If the number dialled is longer than this, only the last 12 digits will
be displayed.
3. If the receiver volume is too quiet or too loud, you can change this to suit
your requirements. The volume can be adjusted with the
4. To end the call, replace the receiver.
If you want to change during a call from the receiver to the handsfree facility,
press the
B: Making a call using the handsfree facility
1. Press the handsfree button
on and you will hear the dialling tone from the in-built loudspeaker.
2. Now dial the required telephone number. The display shows the number
dialled. The display can show a telephone number with a maximum of 12
digits. If the number dialled is longer than this, only the last 12 digits will
be displayed.
If the other party accepts the call, his voice will be heard over the in-built
loudspeaker. When using the handsfree facility always speak loudly and clearly
towards the telephone.
The volume can be adjusted using the
handsfree button.
3. To end the call, press the handsfree button
If you want to change from the handsfree facility to the receiver, simply lift the
receiver.
24
Downloaded from www.Manualslib.com
- Operation -
buttons next to the handsfree button.
button and replace the receiver on the rest.
manuals search engine
. The LED above the button will come
or buttons next to the
or replace the receiver.
or