Suzuki AN400 2002 Serviceanleitung Seite 235

7-24 CHASSIS
BRAKE DISC
• Apply THREAD LOCK to the brake disc bolts and tighten
them to the specified torque.
( 99000-32130: THREAD LOCK SUPER "1360"
% Brake disc bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
)
Keep the brake disc clean, free from dirt and grease.
DUST SEAL
• Press-fit the dust seal 1 using the special tool.
% 09913-70210: Bearing installer set (35 mm)
SPACER
• Install the spacer 1.
• Apply SUZUKI SUPER GREASE to the dust seal lip.
' 99000-25010: SUZUKI SUPER GREASE "A" (Others)
99000-25030: SUZUKI SUPER GREASE "A" (USA)
WHEEL
• Apply SUZUKI SUPER GREASE to the convex parts of
wheel.
' 99000-25010: SUZUKI SUPER GREASE "A" (Others)
99000-25030: SUZUKI SUPER GREASE "A" (USA)
• With the recesses on the wheel engaged with the drive lugs
on the speed sensor, position the wheel to the front fork while
also aligning the speed sensor with the fork stopper.
• Tighten the front axle 1 to the specified torque.
# Front axle: 65 N·m (6.5 kgf-m, 47.0 lb-ft)
• Tighten the axle pinch bolt 2.
# Axle pinch bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
http://www.motorcycle.in.th