Mounting An External Magnetic Sensor With Magnet Tape - Siko MA508 Montageanleitung

MA508
Installation
Fig. 2: Mounting of the magnetic tape
Mounting examples
The simple mounting procedure by means of a beveled magnetic tape as
shown in
ments. In a non-protected environment there is the danger of peeling off.
Mounting approaches as shown in
such cases.
Optimum protection is provided by mounting in a groove as shown in
6. The groove should be deep enough so that the complete magnetic tape
will be embedded in it.
Fig. 3: Magnetic tape
beveled
Fig. 5: Magnetic tape
screwed from top

4.4 Mounting an external magnetic sensor with magnet tape

Alignment of the magnetic sensor
NOTICE
` Take care that the magnetic sensor is aligned correctly in order to
MA508 · Date 23.05.2017 · Art. No. 83093 · Mod. status 304/16
5
1
Fig. 3
can only be recommended for very protected environ-
ensure optimum sensing (see
6
4
3
2
Fig. 4 and Fig. 5
Fig. 4: Magnetic tape screwed
on the front
Fig. 6: Magnetic tape in groove
Fig. 7).
English
are more suitable in
Fig.
25