Target Group; Basic Safety Information - Siko MA508 Montageanleitung

MA508
22 Safety information
NOTICE
WARNING
DANGER
WARNING
CAUTION
Important operating information that may facilitate operation or many
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols

2.3 Target group

Installation instructions are intended for the configuration, commission-
ing and mounting personnel of plant or machine manufacturers who pos-
sess special expertise in drive technology. This group of operators needs
profound knowledge of a electronic display necessary connections and its
integration into a complete machinery.
Insufficiently qualified personnel
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or electronic display.
` Configuration, commissioning, mounting and maintenance by trained
expert personnel only.
` This personnel must be able to recognize dangers that might arise
from mechanical, electrical or electronic equipment.
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
technologies when performing configuration tasks;
• are authorized to commission, earth and label circuits and devices/
systems in accordance with the safety standards.

2.4 Basic safety information

Danger of explosion
` Do not use the electronic display in explosive zones.
Movable parts
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any movable parts as for example sensor.
` Install protective facilities to prevent people from getting access.
External magnetic fields
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the electronic display and the magnetic tape from impact by
external magnets.
MA508 · Date 23.05.2017 · Art. No. 83093 · Mod. status 304/16
English