Symbols On The Product; Symbols On The Display - Husqvarna AUTOMOWER 305 Bedienungsanweisung

20. Loop wire for boundary wire and guide wire
21. Connectors for the loop wire
10
22. Stakes
23. Couplers for the loop wire
24. Screws to attach the charging station
12
25. Power supply
26. Measurement gauge for the installation of the
boundary wire (remove the measurement gauge
from the carton of the product)
27. Operator's Manual and Quick Guide
28. Blade
29. Low-voltage cable
30. Alarm decal

1.5 Symbols on the product

These symbols can be found on the product. Make sure
that you understand them.
WARNING: Read the opera-
tor instructions before you op-
erate the product.
WARNING: Disable the prod-
uct before maintenance or
before you lift the product.
WARNING: Keep a safe dis-
tance from the product when
it is in operation. Keep your
hands and feet away from the
rotating blades of the product.
WARNING: Do not sit on
the product. Do not put your
hands or feet near or below
the product.
Use a detachable power sup-
ply as specified on the rating
plate adjacent to the symbol.
This product complies with the applicable
EU Directives.
This product complies with the applicable
UK Directives.
8
Is a part of the installation kit which is purchased separately.
9
Is a part of the installation kit which is purchased separately.
10
Is a part of the installation kit which is purchased separately.
11
Is a part of the installation kit which is purchased separately.
12
The appearance can be different for different markets.
1508 - 011 -
8
9
11
It is not permitted to dispose the product
as usual domestic waste. Obey national
regulations and use the local recycling
system.
The chassis contains components which
are sensitive to electrostatic discharge
(ESD). The chassis must only be opened
and sealed by an authorized service
technician. The warranty will not be
applicable if the seal is broken.
Do not make modifications on the low-
voltage cable.
Do not use a hedge trimmer or a grass
trimmer near the low-voltage cable.

1.6 Symbols on the display

In the schedule menu you can set when
the product will cut the lawn.
In the cutting height menu you can set the
cutting height of the product.
In the security menu you can select
between 3 security levels for the product.
In the messages menu you can find the
Fault messages and Info messages of the
product.
The Weather timer function automatically
adapts the cutting intervals to the grass
growth.
In the installation menu you can set
manual settings for the installation of the
product.
Introduction - 5