Inhaltsverzeichnis; Introduction - Husqvarna AUTOMOWER 305 Bedienungsanweisung

1 Introduction.......................................................2
2 Safety............................................................... 7
3 Installation...................................................... 10
4 Operation........................................................16
5 Maintenance................................................... 19
6 Troubleshooting..............................................20

1.1 Introduction

Serial number:
Product number:
PIN code:
The serial number and the product number are on the product rating plate and on the product carton.
• Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and
the date of purchase to register your product.
1.2 Support
For support about the product, speak to your Husqvarna
servicing dealer.
1.2.1 Complete Operator's Manual
A complete operator's manual is available in the
®
Automower Connect app and on Husqvarna's
website www.husqvarna.com. It is more in detail
about e.g. instructions about installation, maintenance,
troubleshooting and menu structure.
1.2.2 Product description
Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
2 .
The product is a robotic lawn mower. The product has a
battery power source and operates automatically. When
the battery state of charge is low the product goes to the
charging station to charge. The product starts to operate
again when the battery is fully charged.
The movement pattern of the product is random, which
means that the lawn is cut equally and with less wear.
The boundary wire and the guide wire controls the
movement of the product in the work area. Sensors in
the product sense when it goes near the boundary wire.
The front of the product moves across the boundary wire
with a specified distance before the product stops and
2 - Introduction
Contents
7 Transportation, storage and disposal............. 21
8 Technical data................................................ 22
9 Warranty......................................................... 26
10 EU Declaration of Conformity....................... 27
11 UK Declaration of Conformity....................... 28
1 Introduction
changes direction. The product selects a new direction
when it hits an obstacle or goes near the boundary wire.
Support on page
The display on the product shows the operation mode
of the product. You can select the operation mode and
settings with the buttons on the keypad of the product.
Some models have a maximum cutting time each day
because of the maximum capacity of the product. The
operation time of the product that includes to cut,
search and to charge is approximately 9-10 hours each
day for Automower
Automower
1.2.2.1 Mowing technique
The product is emission free, easy to use and saves
energy. The frequent cutting technique improves the
®
305/405X and 17-18 hours for
®
310 Mark II.
1508 - 011 -