Automower ® Connect - Husqvarna AUTOMOWER 305 Bedienungsanweisung

grass quality and decreases the use of fertilizers.
Collection of grass is not necessary.
1.2.2.2 Find the charging station
The product operates until the battery state of charge
is low, then the product starts to go to the charging
station. The guide wire is put from the charging station
to a remote part of the work area or through a narrow
1.3 Product overview Automower
3
2
1
6
14
12
13
23
22
21
24
1. Product body
2. Top cover
3. Hatch to keypad, display and cutting height
adjustment
4. Stop button
5. Rear wheels
6. Front wheels
7. Blade disc
8. Skid plate
9. Contact plates
10. LED indicator for operation check of the charging
station and boundary wire
11. Charging station
1
Found below the top cover.
2
Is a part of the installation kit.
3
Is a part of the Installation kit.
1508 - 011 -
®
305 / 310 Mark II / 315 Mark II
4
7
8
5
15
16
25
27
passage. The guide wire is connected with the boundary
wire to make it easier and faster for the product to find
the charging station.
®
1.2.2.3 Automower Connect
®
Automower Connect is a mobile application that makes
it possible to select the operation settings remotely.
Automower ® Connect app on page 15 .
Refer to
9
11
17
29
26
28
12. Display
13. Keypad
14. ON/OFF button
15. Rating plate with product identification code
16. Cutting height adjustment
1
17. Maintenance tool
18. Cutting system
19. Chassis box with electronics, battery and motors
20. Handle
21. Loop wire for boundary wire and guide wire
22. Couplers for the loop wire
10
18
19
20
30
31
2
3
Introduction - 3