Operation - Husqvarna AUTOMOWER 305 Bedienungsanweisung

Dashboard shows the current operation of the
• The
product. You can select an operating mode for the
product in the dashboard.
Map shows the current position of the product
• The
and the set center point for the GeoFence function.
• In the Settings menu you can set the settings for
the product.
Statistics menu you can see the statistics of
• In the
the product.
• In the Messages menu you can find the Fault
messages and the Information messages of the
product.
®
The Automower Connect app has Long-range cellular
connectivity and Short-range Bluetooth
3.8.1 To install the Automower
app
1. Download the Automower
mobile device.
2. Sign up for a Husqvarna account in the
®
Automower Connect app.
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
4.1 To use the ON/OFF button
WARNING:
safety chapter before you use the product.
WARNING:
away from the rotating blades. Do not put
your hands or feet near or below the product
when the product is set to ON.

16 - Operation

® connectivity.
®
Connect
®
Connect app on your
4 Operation
Read and understand the
Keep your hands and feet
4. Log in to your Husqvarna account in the
Automower ® Connect app.
3.8.2 To pair Automower
and the product
®
Automower Connect@Home function with Bluetooth
communication is included in Automower
Mark II / 315 Mark II. This means that the mobile device
can communicate with the product while you are in
®
Bluetooth communication range.
1. Do steps 1–3 in To pair Automower
Connect@Home and the product on page 16 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Connect@Home > Pairing > New pairing .
3. Follow the instructions in the Automower
app.
3.8.3 To pair Automower
product
®
Bluetooth communication and the Automower
Connect kit for cellular communication is included in
®
Automower 405X/415X.
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 15 .
2. Use the arrow buttons and the OK button to
move through the menu structure
®
Automower Connect > Pairing > New pairing .
3. Follow the instructions in the Automower
app.
3.9 Download firmware over the air
FOTA (Firmware over the air)
FOTA (Firmware over the air) is included in Automower
405X/415X. This function automatically downloads new
firmware to the product. When a new firmware is
available, a notification shows in the app where you can
select to install the new firmware. In the factory setting
this function is enabled.
WARNING:
when persons, especially children, or
animals are in the work area.
• Push the ON/OFF button for 3 seconds to set the
product to ON. Make sure that the LED indicator
comes on.
• The product is ON and in power save mode if the
LED indicator flashes. Push the ON/OFF button for
3 seconds to set the product to ON.
®
Connect@Home
®
®
305 / 310
®
Accessories >
®
Connect
®
Connect and the
®
Accessories >
®
Connect
®
Do not use the product
1508 - 011 -