Symbols On The Product; Symbols On The Battery - Husqvarna AUTOMOWER 105 Bedienungsanweisung

29. Couplers for the loop wire
30. Loop wire for boundary loop and guide wire
11
31. Stakes
32. Connectors for the loop wire

1.11 Symbols on the product

These symbols can be found on the product. Study them
carefully.
WARNING: Read the user in-
structions before operating
the product.
WARNING: Disable the prod-
uct before working on or lift-
ing the product.
WARNING: Keep a safe dis-
tance from the product when
operating. Keep your hands
and feet away from the rotat-
ing blades.
WARNING: Do not ride on
the product. Never put your
hands or feet close to or un-
der the product.
Never use a high-pressure
washer or even running water
to clean the product.
Use a detachable power sup-
ply as defined on the rating
label next to the symbol.
This product conforms to the applicable
EC Directives.
It is not permitted to dispose this product
as normal household waste. Ensure that
the product is recycled in accordance with
local legal requirements.
9
Is a part of the Installation kit which is purchased separately.
10
Is a part of the Installation kit which is purchased separately.
11
Is a part of the Installation kit which is purchased separately.
12
Is a part of the Installation kit which is purchased separately.
8 - Introduction
9
10
12
The chassis contains components which
are sensitive to electrostatic discharge
(ESD). The chassis must also be resealed
in a professional manner. For these
reasons the chassis shall only be opened
by authorized service technicians. A
broken seal can result in the entire or
parts of the guarantee no longer being
valid.
The low voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the low
voltage cable. Be careful when trimming
edges where the cables are placed.

1.12 Symbols on the battery

Read the user instructions.
Do not discard the battery into fire and do
not expose the battery to a heat source.
Do not immerse the battery into water.
1.13 General manual instructions
The following system is used in the Operator's Manual
to make it easier to use:
italics is a text that is shown in the
• Text written in
display or is a reference to another section in the
Operator's Manual.
• Text written in bold is one of the buttons on the
product.
• Text written in UPPERCASE and italics refer to the
different operating modes available in the product.
1418 - 007 - 17.09.2020