Technical Data; General - Fronius PlasmaModule 10 Bedienungsanleitung

Technical data

General

NOTE!
An inadequately dimensioned electrical installation can cause serious damage.
The mains lead and its fuse protection must be rated accordingly. The technical data
shown on the rating plate applies.
Technical data
Mains voltage
Mains voltage tolerance
Mains fuse protection (slow-blow)
Mains connection
Primary continuous power (100% D.C.
Cos phi
Plasma current range
Pilot current at 10 min / 40 °C (104 °F) 100%
D.C.
Open circuit voltage
Standardised working voltage
Striking voltage (U
The arc striking voltage is designed for manual
operation.
Maximum supply pressure
Tolerance
Linearity
Hysteresis
Temperature dependence with Argon
Degree of protection
Type of cooling
Insulation class
Dimensions L x W x H
Weight
Marks of conformity
Idle state power consumption at 230 V
Power source efficiency at 30 A / 21.2 V
1)
connected to public grid at 230 / 400 V and 50 Hz
2)
PCC = interface to public grid
3)
D.C. = duty cycle
1)
3)
)
p
Z on PCC
max
3)
)
+/- 10% of final value (max.)
+/- 4% of measured value (max.)
+/- 4% of measured value (max.)
+/- 7% of measured value,
from -20 °C (-4 °F) to +70 °C (158
19.88 / 7.09 / 13.54 in.
230 V
-20% / +15%
16A
2)
= 142 mOhm
0.9 kVA
0.99
3.0 - 30.0 A
30 A
88 V
10.1 - 11.2 V
9.5 kV
7 bar (101.49 psi)
°F)
IP 23
AF
B
505 / 180 / 344 mm
14.2 kg
33.31 lbs.
S, CE
25.2 W
80 %
95