Safety Rules; Explanation Of Safety Notices; General; Proper Use - Fronius PlasmaModule 10 Bedienungsanleitung

Safety rules

Explanation of
safety notices
Indicates immediate danger.
▶
Indicates a potentially hazardous situation.
▶
Indicates a situation where damage or injury could occur.
▶
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.

General

The device is manufactured using state-of-the-art technology and according to reco-
gnised safety standards. If used incorrectly or misused, however, it can cause:
-
-
-
All persons involved in commissioning, operating, maintaining and servicing the device
must:
-
-
-
The operating instructions must always be at hand wherever the device is being used. In
addition to the operating instructions, attention must also be paid to any generally appli-
cable and local regulations regarding accident prevention and environmental protection.
All safety and danger notices on the device
-
-
-
-
For the location of the safety and danger notices on the device, refer to the section hea-
ded "General" in the operating instructions for the device.
Before switching on the device, rectify any faults that could compromise safety.
This is for your personal safety!

Proper use

The device is to be used exclusively for its intended purpose.
DANGER!
If not avoided, death or serious injury will result.
WARNING!
If not avoided, death or serious injury may result.
CAUTION!
If not avoided, minor injury and/or damage to property may result.
injury or death to the operator or a third party,
damage to the device and other material assets belonging to the operating com-
pany,
inefficient operation of the device.
be suitably qualified,
have sufficient knowledge of welding and
read and follow these operating instructions carefully.
must be in a legible state,
must not be damaged,
must not be removed,
must not be covered, pasted or painted over.
53