Technical Data; General; Gas-Cooled Torch Body - Ttb 160, Ttb 220, Ttb - Fronius TTB 160 G Bedienungsanleitung

Technical data

General

Maximum permitted open circuit voltage
(U
Maximum permitted striking voltage (Up)
This product meets the requirements set out in standard IEC 60974-7.
Torch trigger technical data:
U
max
I
max
The torch trigger can only be operated within the limits of the technical data.
Gas-cooled torch
body –
Welding current at
TTB 160,
10 min / 40 °C (104 °F)
TTB 220, TTB 260
DC
Welding current at
10 min / 40 °C (104 °F)
AC
Welding current at
10 min / 40 °C (104 °F)
DC
Welding current at
10 min / 40 °C (104 °F)
AC
* D .C. = duty cycle
NOTE!
For torch bodies TTB 160 G, TTB 220 G, and TTB 300 W, the specified welding cur-
rent only applies when using standard wearing parts.
When using gas lenses and shorter gas nozzles, the welding current is reduced.
)
0
TTB 160 G
35% D.C.* / 160 A
60% D.C.* / 120 A
100% D.C.* / 90 A
35% D.C.* / 120 A
60% D.C.* / 90 A
100% D.C.* / 70 A
Argon
(Standard EN 439)
1.0 - 3.2 mm
0.039 - 0.126 in.
113 V
10 kV
35 V
100 mA
TTB 220 G
35% D.C.* / 220 A
60% D.C.* / 170 A
100% D.C.* / 130 A
35% D.C.* / 180 A
60% D.C.* / 130 A
100% D.C.* / 100 A
Argon
(Standard EN 439)
1.0 - 4.0 mm
0.039 - 0.158 in.
TTB 260 G
35% D.C.* / 260 A
60% D.C.* / 200 A
100% D.C.* / 150 A
35% D.C.* / 200 A
60% D.C.* / 160 A
100% D.C.* / 120 A
Argon
(Standard EN 439)
1.6 - 6.4 mm
0.063 - 0.252 in.
41