Technical Data; General; Gas-Cooled Torch Body - Ttb 80, Ttb 160, Ttb - Fronius TTB 80 G Bedienungsanleitung

Technical data

General

This product meets the requirements set out in standard IEC 60974-7.
NOTE!
The performance data specifications only apply when using standard wearing
parts.
When using gas lenses and shorter gas nozzles, the welding current is reduced.
NOTE!
The welding current specifications apply to gas-cooled torch bodies only from a
length of 65 mm (2.56 in.).
When using shorter torch bodies, the welding current is reduced by 30%.
NOTE!
When welding at the power limit of the welding torch, use larger tungsten electro-
des and gas nozzle opening diameters to increase the service life of the wearing
parts.
Take amperage, AC balance, and AC current offset into account as performance-enhan-
cing factors.
Gas-cooled torch
body –
TTB 80, TTB 160,
DC welding current
TTB 220
at 10 min / 40 °C (104 °F)
AC welding current
at 10 min / 40 °C (104 °F)
Shielding gas (Standard EN 439)
Electrode diameter
DC welding current at 10 min /
40 °C (104 °F)
AC welding current at 10 min /
40 °C (104 °F)
Shielding gas (Standard EN 439)
TTB 80 G
1)
35% D.C. / 80 A 35% D.C.
1)
60% D.C. / 60 A 60% D.C.
1)
100% D.C. / 50 A 100% D.C.
1)
35% D.C. / 30 A 35% D.C.
100% D.C.
Argon
1.0 - 3.2 mm
(0.039 - 0.126 in.)
35% D.C.
60% D.C.
100% D.C.
35% D.C.
60% D.C.
100% D.C.
TTB 160 G F
1)
/ 160 A
1)
/ 120 A
1)
/ 90 A
1)
/ 120 A
1)
60% D.C. / 90 A
1)
/ 70 A
Argon
1.0 - 3.2 mm
(0.039 - 0.126 in.)
TTB 220 G
1)
/ 220 A
1)
/ 170 A
1)
/ 130 A
1)
/ 180 A
1)
/ 130 A
1)
/ 100 A
Argon
61