For Longer Breaks In Operation - Sentiotec O-Cv41 Montage- Und Gebrauchsanweisung

Instructions for use for the user
8. Activating/deactivating automatic mode
A) Activating the automatic mode
● Use the UP/DOWN buttons
● Press the PROG/OK
SAUNA
Automatic
After approx. 1 second the following appears in the display:
SAUNA
Fan
The automatic mode is activated. The system begins to heat at the set time.
b) Deactivating the automatic mode
● Use the UP/DOWN buttons
● Press the PROG/OK
SAUNA
Automatic
After approx. 1 second the following appears in the display:
SAUNA
Fan
The automatic mode is deactivated.
c) Ending the automatic mode prematurely
● Press the START/STOP button
The control lights for buttons 8 and A switch off.

8.5. For longer breaks in operation

Turn the ON/OFF switch
Note – interior lighting!
After being switched off by the operating switch
can only be switched on using the light switch
to scroll to the Automatic display
7
button, in the display
6
SEND
ON
AUTO
18:30
to scroll to the Automatic display
7
button, in the display
6
SEND
OFF
OFF
OFF
.
8
of the control unit off.
1
the following appears:
5
the following appears:
5
, the interior lighting
1
.
2
p. 27/34
EN