Connecting The Control Panel; Finishing The Installation - Sentiotec O-Cv41 Montage- Und Gebrauchsanweisung

Installation instructions, for professionals only

5.7. Connecting the control panel

● Guide the connection cable for the operating unit through the cable bushing 9
into the low-voltage connection area 5.
● Connect the plug of the ribbon cable to the connection socket 2.

5.8. Finishing the installation

● Screw two cross-head screws into the lower fastening holes 6 (Fig. 2).
● Ensure that the sauna control unit is fitted securely.
● Place the control panel 2 onto the housing lower part 7. To do so, insert the
tabs 3 into the two lateral holders 4 and press onto the housing lower part
until the stop position (Fig. 1).
● Place the housing cover 6 onto the housing lower part 7, swivel downward
and press until it clicks audibly.
p. 15/34
EN