Operation; Switching On The Light; Setting Options - Sentiotec O-CV41 Montage- Und Gebrauchsanweisung

Instructions for use for the user

8. Operation

Note Fig. 7 (figures chapter).
WARNING!
Risk of fire
Combustible objects that are placed on the sauna heater could ignite
and cause fires.
● NEVER place combustible objects on the sauna heater.
● Make sure that NO combustible objects have been placed on the
sauna heater before the sauna control unit is switched on.

8.1. Switching on the light

The light in the sauna cabin can be switched on and off independently of the
control unit function.
To switch the light on or off, press the light switch
Note
Light switch
that if a switch is on, the interior light cannot be switched off with the
other switch.

8.2. Setting options

The sauna can be operated in manual mode (quick start) or automatic mode.
1. Manual mode
Operation starts immediately with the values last set and automatically ends
once the time set in the heating time parameter has elapsed.
2. Automatic mode
Operation starts with the programmed settings (see chapter 6 and 12)
and light button
2
or the light button
2
are switched on in parallel. This means
4
p. 19/34
.
4
EN