Sentiotec O-CV41 Montage- Und Gebrauchsanweisung Seite 56

Instructions for use for the user
4. Starting the sauna control unit
● Press the START/STOP
The sauna control unit begins to heat immediately with the last set values.
The following appears in display
SAUNA
Heating duration
The control lamps on the
5. Ending the sauna operating mode
a) Manual
Press the START/STOP
The control lamps on the
The control unit is in standby.
b) Automatic
After the set heating duration expires (see chapter "Entering the heating
duration (00:00–06:00)") the sauna control unit automatically switches the
heater off.
The control lights on the
The control unit is in standby.
6. Switching off the sauna control unit
Press the ON/OFF button
The control unit is switched off.
Press the operating switch
The control unit is disconnected from the mains.
Note – interior lighting!
After being switched off by the operating switch
can only be switched on using the light switch
:
8
:
5
ON
02:30
and A buttons light up.
8
: The sauna control unit switches off.
8
and A buttons go out.
8
and A buttons go out.
8
.
3
.
1
p. 22/34
, the interior lighting
1
.
2