Sauna Operating Mode: Manual Operation - Quick Start - Sentiotec O-Cv41 Montage- Und Gebrauchsanweisung

Instructions for use for the user
8.3. Sauna operating mode: Manual operation – quick start
1. Switching on the sauna control unit
Press operating switch
Press ON/OFF button
● In the display
5
e.g.:
SAUNA
Parameter
2. Setting sauna operating mode
Press the A SAUNA button.
3. Entering the heating duration (00:00–6:00)
● Use the UP/DOWN buttons
● Press the PROG/OK
SAUNA
Heating duration
● Use the UP/DOWN buttons
● Press the PROG/OK
SAUNA
Heating duration
After approx. 1 second the following appears in the display:
SAUNA
Heating duration
The heating duration has been set.
WARNING
Risk of fire
Combustible objects that are placed on the sauna heater could ignite
and cause fires.
● NEVER place combustible objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before you activate automatic mode.
.
1
.
3
the last status displayed before switching on appears,
OFF
Value
to scroll to the Heating duration display
7
button, in the display
6
SET
06:00 or the last set value.
to set the required value, e.g. [02:30]:
7
button, in the display
6
SEND
02:30
OFF
STOP
the following appears:
5
the following appears:
5
p. 21/34
EN