Cleaning The Cable Assembly; Disposal; Warranty - Abicor Binzel ABIMIG GRIP W Originalbetriebsanleitung

®
ABIMIG GRIP W
7.3

Cleaning the cable assembly

WARNING
Risk of injury caused by parts swirling around
► When air blasting with compressed air, device parts can come away and cause serious injuries.
► When air blasting the wire guide, wear suitable protective clothing, in particular safety goggles.
1 Replace any damaged, deformed or worn parts.
2 On the welding torch neck: Remove wear parts.
3 Lay out the cable assembly straight.
8

Disposal

Equipment marked with this symbol is covered by European Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE).
► Do not dispose of electrical devices with household waste.
► Disassemble electrical devices before they are disposed of.
► Collect components of electrical separately and recycle in an environmentally responsible manner.
► Observe local regulations, laws, provisions, standards and guidelines.
► Please consult your local authority for information about collection and return of electrical devices.
9

Warranty

This product is an original ABICOR BINZEL product. Alexander Binzel
Schweisstechnik GmbH & Co. KG guarantees correct manufacture and
assumes a plant production and function warranty for this product upon
delivery in line with current state-of-the-art technology and the regulations in
force. If ABICOR BINZEL is responsible for a defect that occurs,
ABICOR BINZEL is obliged to remedy the defect or deliver a replacement at
its own cost and its own discretion. The warranty covers manufacturing faults,
but not damage resulting from natural wear and tear, overloading or
improper use. The warranty period is defined in the General Terms and
4 On the central connector: Unscrew the nut.
5 Air blast the wire conduit from both sides with compressed air.
Conditions. Exceptions in the case of specific products are regulated
separately. The warranty will also be rendered invalid if spare and wear
parts are used that are not original ABICOR BINZEL parts and if the product
has been repaired improperly by the user or a third party.
Wear parts are excluded in general from the warranty. In addition,
ABICOR BINZEL is not liable for damage caused by using our products.
Questions about warranty and service can be addressed to the manufacturer
or our distributors. For more information, visit www.binzel-abicor.com.
8 Disposal
EN - 33