Storage And Transport; Troubleshooting Guide - EINHELL GE-WS 18/10 Li-Solo Originalbetriebsanleitung

9. Storage and transport

9.1 Storage
Store the equipment and its accessories in a dark
and dry place at above freezing temperature.
The ideal storage temperature is between 5 and
30 °C. Store the electric equipment in its original
packaging.
Equipment must always be stored completely dry
and clean.

10. Troubleshooting guide

Fault
The motor does not
start
The equipment
does not spray, or
only sprays at re-
duced power, even
though the tank
is full
Too much spray
mist
Motor stops sud-
denly
Anl_GE_WS_18_10_Li_SPK13.indb 22 Anl_GE_WS_18_10_Li_SPK13.indb 22
GB
Possible cause
a) Equipment not switched on
b) Connections on motor loose
c) Battery not correctly inserted
a) The nozzle is fully or partially clogged
b) The intake fi lter in the spray solution tank
is fully or partially soiled
c) The solution has too high a viscosity and
therefore unsuitable
a) Distance from object is too great
b) Spray width too great
Battery spent
- 22 -
9.2 Transport
•
Switch off the equipment and remove the bat-
tery.
•
Fit the shipping protectors, if any.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine
a) Press the On/Off switch (see
section 6.)
b) Have the tool checked by a
customer service workshop
c) Remove the battery pack and
insert it again (see section 5.)
a) Clean the nozzle (see section
7.3)
b) Clean the intake fi lter (see
section 7.4)
c) Remove the solution and
clean the tool and the tank
(see section 7.)
a) Reduce the spraying dis-
tance
b) Reduce the spraying width
(see section 6.3.1)
Insert a charged battery pack
(see section 5.1)
Remedy
31.01.2023 11:47:41 31.01.2023 11:47:41