Safety Instructions - EINHELL FQ-SKS235 Bedienungsanleitung

Safety Instructions

GENERAL POWER TOOL SAFETY
WARNINGS
WARNING! When using elec-
tric tools basic safety precau-
tions should always be followed to
reduce the risk of fire, electric shock
and personal injury including the fol-
lowing.
Read all these instructions before
attempting to operate this product
and safe these instructions.
Safe operation
- Keep work area clear.
- Cluttered work areas and benches
invite injuries.
Consider work area environment
- Do not expose tools to rain.
- Do not use tools in damp or wet lo-
cations.
- Keep work area well lit.
- Do not use tools in the presence of
flammable liquids or gases.
Guard against electric shock
- Avoid body contact with earthed or
grounded surfaces (e.g. pipes, ra-
diators, ranges, refrigerators).
Keep other persons away
- Do not let persons, especially chil-
dren, not involved in the work touch
the tool or the extension cord and
keep them way from the work area.
Store idle tools
- When not in use, tools should be
stored in a dry locked-up place, out
of the reach of children.
Do not force the tool
- It will do the job better and safer at
the rate for which it was intended.
EN
130
Use the right tool
- Do not force small tools to do the
job of a heavy duty tool.
- Do not use tools for purposes not
intended; for example do not use
circular saws to cut free limbs or
logs.
Dress properly
- Do not wear loos clothing or jew-
ellry, they can be caught in moving
parts.
- Non skid footwear is recommend-
ed when working outdoors
- Wear protective hair covering to
contain long hair.
Use protective equipment
- Use safety glasses.
- Use face or dust mask if working
operations create dust.
Connect dust extraction equipment
- If the tool is provided for the con-
nection of dust extraction and col-
lection equipment, ensure these
are connected and properly used.
Do not abuse the cord
- Never yank the cord to disconnect
it from the socket. Keep the cord
away from heat, oil and sharp edg-
es.
Secure work
- When possible use clamps or a vice
to hold the work. It is safer than us-
ing your hand.
Do not overreach
- Keep proper tooting and balance at
all times.
Maintain tools with care
- Keep cutting tools sharp and clean
for better and safer performance.
- Follow instruction for lubricating
an cleaning accessories.
- Inspect tool cords periodically and