Grinding Wheel Replacement - EINHELL FQ-SKS235 Bedienungsanleitung

Grinding wheel replacement

Warning! Make sure the machine is switched off and unplugged.
1
2
Use the 4 mm allen wrench to remove
the three screws holding the guard
and remove the guard downwards.
2
Use the 5 mm allen wrench to re-
move the screw holding the grind-
ing wheel and remove the grinding
wheel downwards.
3
Place a new grinding wheel on the
spindle of the chain sharpener.
EN
138
3
1
4
Reinstall the wheel flange with its
washer and bolt.
5
Use the 5 mm allen wrench to tighten
the screw holding the grinding wheel.
6 3
2
Use the 4 mm allen wrench to rein-
stall the guard at its three mounting
positions.
1