Items Supplied; Technical Data; Safety Regulations - EINHELL DFP 210 Bedienungs- Und Wartungsanleitung

Anleitung Druchluft-Fettpresse
GB
Dear Customer,
Before you use the grease gun for the first time,
please read these instructions and note the
information for the tool's operation and maintenance.
Always keep this manual with the tool.

1. Items supplied

1 grease gun
1 plug-in nipple R 1/4"
1 nozzle tube

2. Technical data

Permissible working pressure max.
Air consumption
Recommended hose diameter
Compressed air quality
Compressor capacity
equivalent to a motor rating of 2.2 kW.
Work settings
6 bar working pressure set at the pressure
reducer or filter pressure reducer
Please note:
When working with the grease gun, be sure to
wear the necessary protective clothing,
particularly goggles.
Observe the safety regulations.
3. Illustration
9
11
4
08.11.2001 8:43 Uhr
6 bar
113 l/min.
Ø 9 mm
cleaned and oiled
approx. 250 l/min.
3
1
2
18
Seite 4
Item Description
1 air connection
2 plug-in nipple
3 trigger lever
9 nozzle tube
11 filler plug
18 grease container
4. Proper user
The grease gun is a pneumatic tool for general use
in motor vehicle workshops and in farming.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.

5. Safety regulations

Take suitable precautions to protect yourself and
your environment from potential hazards.
Never put the grease gun to any use other than
that intended.
Keep pneumatic tools safe from children.
Always concentrate while you work. Do not work if
you are tired.
Use only a quick-release coupling to connect up
the air supply.
It is imperative to use a pressure reducer to set
the working pressure.
Never use oxygen or combustible gases as an
energy source.
Always disconnect the tool from the air supply
before carrying out any repairs or maintenance
work.
Use only original replacement parts.
Wear the necessary protective clothing,
particularly goggles and safety gloves, when
working with the cartridge gun.
Use only dry, dust-free air. A high-pressure hose,
a quick-release coupling and a combination type
conditioning unit are to be used to connect the
grease gun to the compressor.
Use the pressure reducer on the compressor to
set the required air pressure. A pressure of 6 bar
is sufficient for most jobs.