Dixell Thermostat - Igloo Variant Bedienungsanleitung

9.5.DIXELL thermostat

Fig. 18 DIXELL thermostat panel
LEDs ON THE DISPLAY
LED 1 - Compressor: the LED is on when the compressor is running. It blinks during the delay countdown
LED 2 - Fan: the LED is on when the evaporator fans are on. The symbol blinks when the fan start is delayed after
defrosting
LED 3 - Defrosting: the LED is on when the defrosting function is activated. It blinks during the defrosting time countdown
LED 4 - Alarm: the symbol is visible when an alarm is active
LEDs 5 – current temperature inside the equipment (with one decimal place)
SET DESIRED TEMPERATURE
Display setpoint
• Press to display the setpoint
• Press or wait 5 seconds to return to the main screen
Change temperature settings:
• Press for about 2 seconds
• The display will show the settings; "°C" or "°F" will start blinking
• Use or
• Press or wait 10 seconds to save the changes.
MANUAL DEFROSTING
Defrosting is performed automatically. However, you can start it manually anytime.
• Press for minimum 2 seconds.
*More on www.dixell-emerson.pl
IGLOO.PL
to change the setting within 10 seconds.
Instruction manual - cooling and freezing devices
en
25