Power Outage; Lighting Replacement; Igloo Service - Igloo Variant Bedienungsanleitung

NOTE: Sounds generated by running equipment are normal. The equipment includes fans, motors and compressors
which turn on and off automatically. Each compressor generates a noise during operation. The sounds are genera-
ted by the unit motor and by the coolant flowing through the circuits. This is a technical feature of refrigerating
equipment and does not mean its faulty operation.
The condenser must be kept clean. Dirt impedes the heat exchange, causing, among other things, an increased power
consumption and a risk of compressor damage.

8.2.Power outage

If there has been a power outage or the equipment has been disconnected form the mains and then reconnected, the
equipment should switch on automatically. When the power is restored, check if the equipment operated properly. In case
of any problems, contact the authorized service.

8.3.Lighting replacement

You can replace the LED lights on your own.
Be careful and observe general OHS rules. First:
1. Turn off the lights in the equipment – put the light switch to OFF on the panel, then put the main switch to OFF, and
remove the plug rom the outlet.
2. Remove the light shade (if any) – depending on the equipment model.
3. Pull out the light from the holders and unfasten from the fixtures, turning it slightly around its axis.
4. Install the new light, turn it around its axis in the holders, and put it in the correct position.
5. Put the plug into the outlet.
6. Turn on the main switch on the panel, and then turn on the light switch.
If the LED-board type of light does not work (e.g. in selected racks with backlit top advertising panel), the replacement
should be performed by authorized service.

8.4. IGLOO service

Telephone IGLOO: +48 (14) 662 19 10 or +48 801 080 257
e-mail: serwis@igloo.pl
If after checking the items listed in section 8.1 Troubleshooting, the equipment still does not work preoperly, cointact the
Igloo Technical Service, quoting the data from the rating plate
20
Instruction manual - cooling and freezing devices
• Serial number (NS)
• Production date
• Type (equipment name) and
• Purchase date
• Problem description
• Detailed address and telephone number (including area code)
Fig.13 Example of rating plate
en
IGLOO.PL