Safety - Signs And Pictograms; Important Signs And Information; Transport And Unloading; Packacking And Transport Conditions - Igloo VARIANT Bedienungsanleitung

Each refrigeration/ freezing furniture must be adequately thermally insulated. If the equipment has night roller blinds or
plexiglas night covers, remember to use them. The outside heat flowing into the equipment makes the unit activate more
frequently and increases the electricity consumption.
3.SAFETY – SIGNS AND PICTOGRAMS
For optimum and safe operation of the equipment please observe all information, warning and safety signs described in
this Manual and/or placed on the equipment.

Important signs and information

NOTE: Drainage removal. Label on the equipment base. If the equipment does not feature an overflow pan,
water shall be removed from the evaporating tank or condensate container.
Protective earthing. Label on the equipment base.
Maximum line of product load in the equipment. Label on glass sides

4.TRANSPORT AND UNLOADING

4.1.Packaging and transport conditions
The equipment is shipped from the manufacturer on a wooden platform, pallet or in the crate, protected by carton angles
and plastic film.
Some components may be dismantled for transport, and suitably secured and packed.
Pay attention to glass parts during transport and loading/unloading.
Transport the equipment in the operating position and secure it against movement.
It is forbidden to stack the equipment, place one onto the other. Hazard of property damage, and death
or injury of people present in the vicinity.
After receiving the consignment, check for possible transport damage. Report all damage to the carrier immediately and
make a damage report. The manufacturer is not responsible for the equipment damaged during transport.
Do not throw the packaging and protection materials as garbage. Recycle!
IGLOO.PL Instruction manual - cooling and freezing devices
en
9