Connecting To Sewers (Remote Type); Connecting To Mains - Igloo Variant Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

During the first start of equipment with an air-trap pour about 0.3 litres of water to each outflow opening in order

to fill the air-trap. Air-traps filled with water are natural valves preventing entry of unpleasant smell from sewers.

5.2.4.Connecting to sewers (REMOTE type)

If the equipment features an external unit (mod/C), connect the defrosting water drainage directly to sanitary

sewers and carefully inspect the pipes and fastenings, check the unobstructed flow and leak-tightness. The

pipes connection places are marked in

Start the equipment only after verifying the effectiveness of electric shock protection by means of measu-

rements conforming to applicable regulations!

IGLOO.PL

Fig.2 Typical condensate container

1 – Water drain from the equipment (air-trapped)

2 – Water drain hose from trough (outflow of condensa-

te from evaporator defrosting)

3 – Condensate container (to be emptied)

Fig.3 Typical overflow (version with evaporating tank)

1 - Water drain from the equipment (air-trapped)

2 - Water drain hose from trough (outflow of condensate from evapo-

rator defrosting)

3 - Overflow (remove condensate if water overflows from evapora-

ting tank!)

4 – Evaporating tank

Fig. 4 Typical condensate tray

1 – Water (condensate) drain hose

2 – Condensate tray

Fig. 5 Typical condensate container (outflow without

air-trap)

1 – Ventilation openings

2 – Condensate container

3 – Water drain hose

Instruction manual - cooling and freezing devices

Inhaltsverzeichnis