Identification
10
Identification
10.1 Ordering information
CLM280 conductivity handheld instrument
Order No.: 51510539
10.2 Scope of delivery
The scope of delivery consists of:
• 1 CLM280 handheld instrument
• 1 CLS381 four-electrode conductivity sensor with integrated temperature sensor NTC 30,
1.5 m (4.9 ft) fixed cable and waterproof DIN connector
• 1 plastic bottle with standard solution 0.01mol/l KCl solution, 50 ml (1.7 fl.oz.),
1.413 mS/cm at 25 °C (77 °F)
• 1 plastic beaker, 50 ml (1.7 fl.oz.)
• 1 support unit as electrode holder
• 4 alkali-manganese batteries, 1.5 V
• 1 sturdy PP plastic case with integrated measuring station and separate compartment for
sensor and accessories
• 1 set of Operating Instructions BA347C/07/b4
If you have any questions, please contact your supplier or your local sales center.
11
Wiring
11.1 Inserting the batteries
1.
Release the four screws on the housing base and remove the top.
2.
Insert the batteries. Make sure the polarity is correct (see Fig.).
3.
Fit the top and tighten the four screws of the housing base.
!
Note!
Only use leak-proof alkali-manganese batteries (Mignon AA type).
20
CLM280
Endress+Hauser