Medel ELITE Gebrauchsanweisung Seite 65

3. Once a pulse is detected, the "
"symbol blinks.
4. Once you reach the correct pressure, inflation stops and
the cuff starts to deflate.
5. When the measurement is completed, the systolic / dias-
tolic pressure and pulse are shown simultaneously.
6. In case the measurement shows
irregular heartbeat (I.H.B.), the "
symbol is displayed. In this case the
results of the measurement have devi-
ated from a normal situation. Then the
measurement needs to be repeated.
In the majority of cases, this is not
cause for concern. If the symbol "
appears regularly (for example several
times a week during different daily
measurements) it is advisable to dis-
cuss it with your medical advisor.
"
"
65
7.4 How to use the memory function
• In clock mode (Off
mode), press MEM
button. The number of
stored data is shown,
sudden the latest result
will be displayed with
date and time.
• Press MEM button repeatedly to review the results
measured.
7.5 T3 System: How to see the average of the last 3
measurements (taken within the last 15 minutes)
1. Press O/I button and take the first measurement.
2. At the end of the first measurement wait at least 5 min-
utes in a relaxed position.
Then repeat the measurement following step 1 again.
3. At the end of the second measurement wait at least
5 minutes in a relaxed position.
Then repeat the measurement following step 1 again.
4. At the end of the third measurement
press T3 button to perform the
average of the last three measure-
ments taken (the AVG symbol will
appear).