Maintenance And Cleaning; Information About Recycling And Disposal; Eu Declaration Of Conformity - Parkside PFDS 120 A2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Maintenance and cleaning / Information about recycling and disposal / ...
z Maintenance and cleaning
Note: The welding device must be regularly
serviced and overhauled for proper function
and for compliance with the safety require-
ments. Improper and wrong operation may
cause failures and damage to the device.
Have repairs only conducted by qualified
electricians.
Switch off the main power supply and
„
the main switch of the device off prior to
performing any maintenance or repair
work on the welding device.
Clean the interior and exterior of the wel-
„
ding device regularly. Use compressed
air, cotton waste or a brush to remove
dirt and dust on the inside.
In case of a defect or a necessary repla-
„
cement of equipment parts, please con-
tact the appropriate qualified personnel.
z Information about recycling
and disposal
Don't waste, recycle!
Always recycle the device,
accessories and packaging in
an environmentally-friendly
manner.Do not dispose of the welding device
in household waste, in fire or in water.
Devices which are no longer functional
should be recycled whenever possible. Ask
your local dealer for help.
z EU Declaration of
Conformity
We,
C. M. C. GmbH
Documentation officer:
Dr. Christian Weyler
Katharina-Loth-Str. 15
DE-66386 St. Ingbert
GERMANY
22 GB/IE/NI/CY/MT
declare in our sole responsibility the product
Flux cored wire welder
Article number: 2330
Year of manufacture: 2021/18
IAN: 361776_2007
Model: PFDS 120 A2
meets the basic safety requirements of Euro-
pean Directives
EC low-voltage directive
2014 / 35 / EU
EU directive on electromagnetic com-
patibility
2014 / 30 / EU
RoHS directive
2011 / 65 / EU + 2015 / 863 / EU
and their amendments.
The manufacturer bears sole responsibility
for compiling the declaration of conformity.
The object of the declaration described
above meets the requirements of Directive
2011/65/EU of the European Parliament
and Council dated June 8th, 2011, restric-
ting the use of certain hazardous substances
in electrical appliances.
The conformity assessment is based on the
following harmonized standards:
EN 60974-1:2012
EN 60974-10:2014/A1:2015
St. Ingbert, Oktober 1st, 2020
by proxy (i. A.) Dr. Christian Weyler
- Quality assurance -