Emc Device Classification - Parkside PFDS 120 A2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Safety notes
or reflecting radiation at least
up to head height, e.g. by a
suitable coating.
z EMC device classification
According to the standard IEC
60974- 10, this is a welding
device in electromagnetic compa-
tibility Class A. Class A devices
are devices that are suitable for
use in all other areas except li-
ving areas and areas that are di-
rectly connected to a low-voltage
supply mains that (also) supplies
residential buildings. Class A
devices must adhere to the Class
A limit values.
WARNING NOTICE - Class A
devices are intended for use in
an industrial environment. Due to
the power-related as well as the
radiated interference variables,
difficulties might arise in ensuring
electromagnetic compatibility in
other environments.
Even if the device complies with
the emission limit values in ac-
cordance with the standard, such
devices can still cause electro-
magnetic interference in sensitive
systems and devices. The user is
responsible for faults caused by
the arc while working, and the
16 GB/IE/NI/CY/MT
user must take suitable protective
measures. In doing so, the opera-
tor must consider the following:
– Mains, control, signal and tele-
communication cables
– Computers and other micropro-
cessor-controlled devices
– TVs, radios and other playback
devices
– Electronic and electrical safety
equipment
– Persons with heart pacemakers
or hearing aids
– Measuring and calibration
equipment
– Interference immunity of other
nearby equipment
– The time of day at which the
work is being done
The following is recommended
to reduce possible interference
radiation:
– Fit a mains filter to the mains
connection
– Service the device regularly
and keep it in good condition
– Welding cables should be
completely unwound and run as
parallel as possible on the floor
– If possible, devices and systems
at risk from interference radiation
should be removed from the work
area or shielded.
The product is intended solely for
professional use.