Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning; Information About Recycling And Disposal; Warranty And Service Information; Warranty Conditions - Parkside PFDS 120 A2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Fülldraht-schweissgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 91
Maintenance ... / Information about recycling and ... / Warranty and service information
z Maintenance and cleaning
Please note: The welding device must be
regularly serviced and overhauled for proper
function and for compliance with the safety
requirements. Improper and wrong opera-
tion may cause failures and damage to the
device.
Switch off the main power supply and
the main switch of the device off prior to
performing any maintenance or repair
work on the welding device.
Clean the interior and exterior of the
welding device regularly. Use com-
pressed air, cotton waste or a brush to
remove dirt and dust on the inside.
In case of a defect or a necessary
replacement of equipment parts,
please contact the appropriate qualified
personnel.
z Information about recycling
and disposal
Don't throw away – recycle!
Please return this device, accessories
and packaging to your local
recycling depot.
Do not dispose of the inverter welding
device in household waste, in fire or in
water. Devices that are no longer functional
should be recycled wherever possible.
Ask your local stockist for advice.
z Warranty and service
information
Warranty from Creative Marketing &
Consulting GmbH
We give you a warranty on this device of
3 years from the date of purchase. In the
event of product defects, you have legal
rights against the retailer of this product.
Your statutory rights are not affected in any
way by our warranty conditions, which are
described below.
z Warranty conditions
The warranty period begins on the date of
purchase. Please retain the original sales
receipt. This document is required as your
proof of purchase.
Should this product show any defect in
materials or manufacture within 3 years from
the date of purchase, we will repair or replace
it – at our discretion – free of charge. This
warranty service requires that you retain proof
of purchase (sales receipt) for the defective
device for the three year period and that you
briefly explain in writing what the fault entails
and when it occurred.
If the defect is covered by our warranty,
we will repair and return your product or send
you a replacement. The original warranty
period is not extended when a device is repair
or replaced.
z Extent of warranty
This device has been manufactured accord-
ing to strict quality guidelines and carefully
inspected before delivery.
The warranty applies to material and
manufacturing defects only. This warranty
GB/MT
87

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pfds 33 b4

Inhaltsverzeichnis