Tig Welding; Maintenance And Cleaning; Information About Recycling And Disposal - Parkside PMSG 200 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

... / TIG welding / Maintenance and cleaning / Information about recycling ...
of the direction of movement on the
properties of the weld seam:
Note: You decide for yourself which
type of welding is most suitable, once
Burn
Weld seam width
Weld bead
Weld seam fault
 TIG welding
For TIG welding please follow the
instructions for your TIG torch. You can
select TIG mode by pressing the
welding mode selector key
this select the "TIG" position.
 Maintenance and cleaning
The welding device must be
Note:
regularly serviced and overhauled for
proper function and for compliance
with the safety requirements. Improper
and wrong operation may cause fail-
ures and damage to the device. Repairs
must only be carried out by qualifi ed
electricians.
Switch off the main power supply

and the main switch of the device
off prior to performing any mainte-
nance work on the welding device.
you have welded a sample piece.
Note: Once it has worn down com-
pletely, the electrode must be replaced.
Push welding
smaller
larger
fl atter
larger


. To do
35
 Information about
Do not dispose of the welding device in
household waste, in fi re or in water.
Devices that are no longer functional
should be recycled wherever possible.
Ask your local stockist for advice. To do
this, please see 2012/19/EU.
Drag welding
Clean the welding device and
accessories regularly using air, cot-
ton waste or a brush.
In case of a defect or a necessary
replacement of equipment parts,
please contact the appropriate qual-
ifi ed personnel.
recycling and disposal
Don't throw away –
recycle!
Please return this device,
accessories and packaging to
your local recycling depot.
GB/CY
larger
smaller
higher
smaller
27