Removing Of The Shipping Bolts - Pkm WA12-ES1415DI Bedienungsanleitung

10. If you install the appliance on a wooden floor, you must also place it on a
plywood panel (60.00*60.00 cm) at least 3.00 cm thick to distribute the weight
of the appliance. Fix and secure the plywood panel properly to the wooden floor.
11. All required installations for the electric and water supply must be carried out by
a qualified professional.
12. Connect the appliance to the mains properly.
13. The nameplate is situated at the back of the appliance.

2.3 Removing of the shipping bolts

1. The four shipping bolts (A) are on the back of the appliance (s. fig. below).
A
2. Unscrew all shipping bolts approx. 30 mm out of the appliance using a
spanner: s. fig. below / note the direction of the arrow. Do not unscrew the
shipping bolts completely!
S
HIPPING BOLTS
~ ~
91