Charging Times - Parkside PASSK 20-Li B2 Originalbetriebsanleitung

GB
red according to a standardised test pro-
cedure and can be used to compare one
power tool with another.
The total vibration value(s) and the specifi ed
noise emission value(s) stated can also be
used for a provisional assessment of the load.
Warning: The vibration and noise
emissions may deviate from the
specifi ed values during actual use of
the power tool, depending on how
the power tool is being used and, in
particular, what kind of material is
being worked on.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Charging time (min.)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart PLGS 2012 A1
20
PAP 20 A1
PAP 20 A2
PAP 20 B1
60 90
45 60
35 45
35 45
35 40

Charging times

The device is part of the ( Parkside)
X 20 V TEAM series and can be operated
using ( Parkside) X 20 V TEAM series batte-
ries.
Batteries of the ( Parkside) X 20 V TEAM
series may only be charged using chargers
of the ( Parkside) X 20 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries
only: PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1
We recommend charging these
batteries with the following chargers:
PLG 20 A3, PLG 20 C1, PLG 20 C3,
PLG 20 A4, PDSLG 20 A1,
Smart PLGS 2012 A1
PAP 20 A3
PAP 20 B3
Smart PAPS 204 A1
120
80
60
60
50
Smart PAPS 208 A1
240
165
120
120
55