Charging Time - Parkside PSBSA 20-Li C3 Originalbetriebsanleitung

GB
Sound pressure level (L
Idle ....................... 73.1 dB, K
Impact drilling ........ 96.8 dB, K
Sound power level (L
Idle .......................84.1 dB; K
Impact drilling ......107.8 dB; K
Vibration (a )
h
Drilling ............2.71 m/s
Impact drilling 10.24 m/s
for use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band .....2400 - 2483.5 MHz
Max. transmission power ....... ≤ 20 dBm
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Charging time (min)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
PDSLG 20 B1
Smart PLGS 2012 A1
20
)
pA
= 5 dB
pA
= 5 dB
pA
)
WA
= 5 dB
WA
= 5 dB
WA
; K= 1.5 m/s
2
2 ; K= 1.5 m/s
PAP 20 A1
PAP 20 A2
PAP 20 B1
60
45
35
35
35
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibrations
as low as possible. An example of how
to reduce vibration exposure is limiting
2
2 the working hours. For this purpose all
parts of the operating cycle have to be
considered (for example, times when
the electric tool is switched off and
times when it is switched on but running
without any load).

Charging time

The device is part of the (Parkside) X 20 V
TEAM series and can be operated with bat-
teries of the (Parkside) X 20 V TEAM series.
Batteries of the (Parkside) X 20 V TEAM
series may only be charged using chargers
of the (Parkside) X 20 V TEAM series.
We recommend that you operate this
appliance with the following batte-
ries only: PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1.
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 C1, PLG 20 C3, PLG 20 A4,
PDSLG 20 A1, Smart PLGS 2012 A1.
PAP 20 A3
PAP 20 B3
Smart PAPS 204 A1
90 120
60 80
45 60
45 60
40 40
Smart
PAPS 208 A1
210
165
120
120
50