Installing The Switch - Kärcher 2.644-371.0 Bedienungsanleitung

5. Hook the tow rope to the lifting motor with the M6x25 screw
and the self-locking nut.
6. Hook the tension spring into the tow rope and into the bracket
of the side brush.
Connection cable
1
7. Lay the connection cable of the lifting motor properly from be-
low into the electronics compartment.
8
Connection cable
1
Cable ties
2
Electronics compartment
3
8. Secure the connection cable with cable ties.
1. Unscrew the screw (7x).
Screw
1
Control panel
2
2. Remove the control panel.
English

Installing the switch