Herunterladen Inhalt Inhalt Diese Seite drucken

Installation And Connection; Moving And Unpacking; Installing The Built-In Oven - hanseatic 65P90E1-E11L000 Gebrauchsanleitung

Einbaubackofen mit zeitschaltuhr und pyrolyse-funktion
Vorschau ausblenden Andere Handbücher für 65P90E1-E11L000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Page GB-24

Installation and connection

Installation and connection
WARNING
Risk of injury!
The built-in oven is heavy and bulky.
Get another person to help with mov-
ing and installation.
Do not use the oven door and door
handle as a step or for lifting.
Fire hazard!
Improper handling of the built-in oven
may result in damage or cause a fi re.
Heat trapped inside the appliance may
shorten its service life.
Ensure suffi cient ventilation. Do not
cover the vents, for example with
oven gloves or cookbooks.
When installing the appliance, follow
the dimension specifi cations for ven-
tilation.
CAUTION
Risk of damage!
Improper handling of the appliance
may result in damage.
Do not use sharp objects to unpack
the appliance.

Moving and unpacking

• Move the appliance using a trolley or with
the help of a second person.
• Carefully unpack the device and remove
all packaging items, plastic profiles, adhe-
sive strips and foam padding from inside,
outside and from the back plate of the
device.

Installing the built-in oven

The built-in oven is designed for installation in
standard kitchen units. It can be installed at
eye-level and underneath the worktop.
The following conditions must be observed:
– Do not install the built-in oven directly
next to a refrigerator or freezer. This will
increase its energy consumption unneces-
sarily due to heat emission.
– The best place is next to the sink. You have
an additional work surface and dirty dishes
can be washed immediately.
– Before installation, check whether the ap-
pliance dimensions are compatible with
your furniture dimensions.
– In terms of fire protection, the built-in oven
conforms to Type Y (EC 335-2-6). This
type of appliance may only be installed on
one side of taller kitchen cabinets, appli-
ances or walls.
– The installation recess may not have a rear
panel, at the most it may have an add-on
edge measuring no more than 50 mm.
– The built-in cabinet can be equipped with
either ledges/rails or an intermediate shelf
with ventilation cut-out.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis